Shearing Machine | A Simple Guide | 2022

Today's Shearing machine is widely used in the market and these machines are available with various capacities in the market along with overload protection. The main purpose of Shearing is to divide big flat stock like plate, sheet, and strip.

What is the purpose of the shearing machine?

Shearing machines are multipurpose devices used to cut the alloys and other sheet metal.

Sheet shearing devices are of two kinds

1.  Hydraulic Shearing device

Hydraulic shearing devices has two categories

•  Hydraulic rotation shaft 

•  Guillotine shears.

Planning to buy Rico Hydraulic Shearing Machine

2.  Automated Shearing device

Automated kinds consume too much energy 

Advantages of Shearing Machine

• Hydraulic metal shear machines are fast and accurate, it makes it possible to cut a lot of metal in factories.

• Hydraulic shears do not need a lot of services and are thus cost-efficient. 

• Hydraulic shears are typically lightweight devices

• It requires less space 

• Hydraulic shearing machines protect metal with cramps and achieve optimal cutting and even cutting at 90 degrees.

• Low maintenance.

• During cutting, protects blades and machines from damage.

• Wide range o availability for all sizes of metal

Sheet Metal Shearing Tool Safety Tips

• Conduct Regular Tool Inspection

• Provide Appropriate Training to the Workers

• Schedule Routine Maintenance and Repair

• Use Personal Protective Equipment (PPE)

• Maintain Safe Working Distance

The Precaution of Sheet Metal Shearing Machine

While Operating the Sheet Metal Shearing Machine

• Make sure that any available safety magnification, such as light curtains or rear-guards, are in place.

• Always care for overheating or smoking, turn off the power immediately if this occurs. 

• Ensure you have the right size blades for the material you are using. 

• Need to confirm not exceed the manufacturers’ rated capacity.

• Based on the thickness of the plate change the barrel distance

• Work carefully and slowly when you cut sheet metal.

Also read Metal fabrication safety protocol

Makes your work more easier with quality industrial machines. We offer a wide range of industrial purpose machines at the best price. Contact Hytek Marketing and get to smart work.

Planning To Buy a Clamping or Holding Tool? A simple guide[2022]

Technology has developed more to defeat the challenges of workmanship. Materials, and tools used need to be of good quality to achieve the best and fast performance.

A clamp holder is a fastening device used to grasp or secure gadgets tightly

together to prevent motion or separation through the application of inside pressure.

Before you buy a clamper you can go through this guide, it may help to get an overview of the tool.

What is a clamping tool?

-Clamps are adaptable tools that serve to hold the work temporarily

and securely in place.
-Clamping devices are used to diminish the malformation during the

machining process.

What are the different types of clamping positioners?

• Lever of Strap Clamps.

• Screw Clamps.

• Cam-Action Clamp

• Two-Way Clamps.

• Wedge Operated Clamps.

• Cam Operated Clamps.

• Toggle Action Clamps.

• Locking Clamps.

• Angle Clamps. 

• Flooring Clamps.

• Band Clamps. 

• Toggle Clamps.

Where can we use the Clamping or Holding tool?

Clamping tools are used for many applications, including:

• Carpentry

• Woodworking.

• Furniture making.

• Welding. (On welding table)

• Construction.

• Metalworking.

Read on the Importance of Modular Welding table in your Industry

Why do you choose clamping tools?

It's because a lot of benefits are available, some of them are mentioned below.

If you have to know more deeply about clamping, check the clamping holder.

• Easy to operate.

• Extremely easy to maintain.

• Ensure problem-free clamping.

• Clamping ensures a secure joint at any time.

What are holding tools?

• It is a  manufacturing holding tool, also known as a fixture. 

• This provides support to the device frequently used in the manufacturing industry to solidly position a tool in a specific spot or direction.

• For a holding purpose, Lifting Magnets are also available.

What are the different types of holding tools

• Combination Pliers /Mechanical Pliers.

• Slip joint pliers.

• Side Cutting Pliers.

• Long Nose Pliers

Are you excited to know how the clamping tool or clamping positioner works?

Are you interested in buying a branded clamping holder? Contact Hytek Marketing for the Best quality Clamper and all other industrial purpose equipment.

Benefits of Vacuum Lifting Devices [2022]

 

Vacuum lifting devices are widely used in many industrial sectors for the lifting and handling of materials/components. Tube Lifter which can defend your automation processes, make your handling tasks safer, and increase the operating economy of your production processes.

Vacuum lifting devices have  lots of advantages, some of them are listed below

• Speeds up installation.

 Pick-up and accurate positioning help to greatly increase the speed of the installation task

• Reduces labor costs.

Only one person is needed instead of two or three people to pick up and move the part.

• Improves working conditions & Complies with all safety standards.

Helps to prevent heavy lifting work, keeps us safe.

• Prevents damage & Unload cycles with less downtime than conventional methods.

Diminishes the risk of damage because of using Suction cups.

• There are no chains for hook and detach.

Vacuum lifting allows faster load and unload cycles with less downtime than conventional methods

.

• Reduces the risk of accidents and lowers paysheet and insurance costs.

Commitment to safety.

• Air Pollution and Noise is Less.

Produce near-zero noise and air pollution.

• Good show in cold climate & avoid fuel freezing.

 Enhance the start-up performance in cold climates and avoid the chance of fuel freezing in utmost conditions. 

• Less weight & Faster Load.

The vacuum lifter device’s weight is less than diesel models and has greater total lift capacities.

You can also check the review of the GRABO Portable Electric Vacuum Lifter, it helps to you do know more about lifter.

Are you interested to buy an international standard vacuum lifting device & electric vacuum lifter? Contact Hytek Marketing for the Best quality branded vacuum lifter and all other industrial purpose machines.

CNC PLASMA CUTTING MACHINE- A SIMPLE GUIDE TO OVERVIEW

 

Although technology has germinated to defeat the challenges of workmanship, materials, and tools used need to be delicate to achieve the best cutting action. For increasing productivity in the cutting room computerized fully automatic cutting machines have to be used.

What is a cutting machine?

A cutting machine is used for cutting out parts of materials.

What are the Different Types of  Cutting Machine?

Based on the working process, the cutting machine may be classified into three categories. 

1. Manual cutting machine.

2. Semi-Automatic cutting machine.

3. Fully Automatic / Computerized cutting machine.

1) Manual Cutting Machine:

• Hand Operated Scissor.

2) Semi-Automatic Cutting Machine:

• Straight knife of Cutting Machine.

• Round Knife Cutting Machine.

• Band Knife Cutting Machine.

3) Fully Automatic / Computerized Cutting Machine:

• Plasma Cutting Machine.

• Computer Controlled Knife Cutting Machine.

• Laser Cutting Machine.

• Water Jet Cutting Machine.

• Aluminum and PVC cutting machine.

What is Plasma?

We all have heard about the three fundamental states of matter – solid, liquid, and gas. But there is a fourth one. Yes, it is plasma.

Plasma Cutting Machine

This machine is a fully automatic Computerized plasma cutter.

Plasma cutting is a procedure that cuts through electrically conductive materials by means of a quickened jet of hot plasma.

CNC plasma cutting machine

• The term “CNC” refers to “Computer Numerical Control”, which means that a computer is used for the motion of the machine found on numerical codes in a program.

• A CNC Plasma cutting machine uses a plasma cutter to cut thin to thick metals ahead with a multi-axis grid.

• The CNC technique gives a benefit over handheld plasma cutting tools due to the cut being programmed and controlled by a computer rather than human motion.

It is widely used to cut a different range of metals, involves

• Steel

• Stainless steel

• Aluminum

• Copper

• Brass

Advantages of CNC Plasma cutting machine

• Able to cut all conductive materials.

• Can cut in water.

• Also reduces noise levels.

• Smaller cutting kerf.

• Quicker cutting speed.

• Increased Productivity

• Efficiency

• Precision

• Reasonably priced

• Safety

• Easy to use

• Better results

Applications 

• Metal fabrication projects.

• on-site construction.

• Salvage yards.

• Designers and artists.

• Signage and sculpture.

• decorative panels for interior projects.

Conclusion

Get you above machines and all other cutting machines through a single supplier – Hytek Marketing. Contact for all of your tools will make your purchasing process fast and easy and permissive.

Hytek Marketing is now the leading distributor of NS Maquinas Pipe Finishing Machine in India

NS Maquinas is recognized as the world-leading developer of patented, high-performance Pipe Finishing Machines for the metal working industry.

NS Maquinas is able to guarantee customers reliable and fully tested Pipe Finishing Machines with over 45 years of experience in this field. The company is located in Portugal, NS Máquinas is able to create and offer machines that combine quality and adequacy for diverse production requirements. NS Máquinas is a manufacturer of machines for the metal finishing, deburring, and polishing industry.

Our growing range of NS Maquinas Pipe Finishing Machines can be found here. Can’t find what you are searching for? Now, you are in the right place, visit Hytek Marketing, or contact us by email (hytek@hytekmarketing.biz) or call now: +912040036057.

Save your valuable time with  NS Maquinas Pipe Finishing Machines.

Clamping Tools, Types & Requirement

Clamping devices are used to minimize the distortion of the metal during the machining process. Once the workpiece is located on the work table, it is necessary to hold it against the machining force. The mechanism used for clamping is known as clamps. They are holding devices usually positioned above the supporting surfaces. In some cases, fiber pads are riveted to the face of clamps where the metallic clamp gets in contact with the workpiece to avoid damage by metallic contact.         

Requirement for a clamping device

Some essential requirements that should fulfill by clamping devices are;

1.    The clamping tool must hold the workpiece rigidly while machines work against all disturbing forces acting on the workpiece. The clamping force should only be enough to stay the workpiece in the correct position.

2.    The clamping shouldn't damage workpieces while holding them. The clamp should contact at the most rigid points of the component.

3.    The clamping should be applied only where the workpiece has enough support of the fixture body. It helps to avoid the bending and damaging of the workpiece thanks to clamping force.

4.    Clamping shouldn't loosen during the machining process thanks to vibration and distortion. 

Rules for clamping:

·       Always use a piece of scrap wood or a fiber coating between the clamp jaws and working parts to prevent damaging the part.

·       Apply clamp load perpendicular to the part to stop slippage.

·       Always use a minimum of two clamps to stop rotation.

·       Do not overtighten. Overtightening can damage the clamp.

Types of clamps

There are different types of clamping tools all designed to carry out various tasks and workloads, some of them are;

1.    Screw Clamps

Screw clamps are a type of screw mechanism to adjust the jaws and clamp a workpiece in place.

2.    Quick-Release Clamps

Also known as one-handed clamps, designed with a mechanism that allows the user to release a workpiece in one quick movement.  

There are different types of quick-release clamps, including lever clamps, spring clamps, and trigger clamps.

3.    Bar Clamps

Bar clamps are a metal bar that holds the two jaws parallel. The extensive bar allows the user to clamp long or wide workpieces effectively, making them a useful tool to have for heavy-duty work. 

4.    Locking Clamps

Locking clamps allows being quickly locked or released in one swift movement using the integrated lever. Due to their wide jaw opening and square shape, locking clamps are designed for clamping large or awkward objects that other clamps may be unable to grip on.

5.    Angle Clamps

Angle clamps are designed for clamping objects at an angle. It's a perfect clamp to use when wishing to make miter joints or corner cuts.

6.    Flooring Clamps

Designed to be used when layering flooring, including wooden, panel or laminate floorboards.

7.    Band Clamps

Also known as strap clamps, and are designed to hold on to circular, square, or irregularly shaped objects.

8.    Toggle Clamps

Toggle clamps only have one clamping plate and add conjunction with a worktop, like a bench surface, to carry a workpiece steady. The clamp is meant to be permanently fixed to the workbench, by bolting it into place.

If you’re looking for a quality clamping tool with international standards, then contact hytek marketing. The leading company that supplies metal fabrication machinery equipment all around the globe so no order is too small or too large to complete!